
Fence Staining in Greer
Privacy, shadowbox, board-on-board, and farm fence — stained both sides with a penetrating oil-based finish that resists peeling. Prep only when the wood needs it.
Fence staining details →Greer is the closest big town to our Duncan home base — about ten minutes up Highway 101 — and it’s grown into the Upstate’s second-largest city on the back of BMW and GSP. That growth left two very different kinds of wood in Greer backyards: established neighborhoods like Sugar Creek and Pelham Falls with decades-old decks, and 2015-and-newer subdivisions like Redcroft and O’Neal Village where builder-installed pine privacy fences went up bare — and are now graying out street by street.

Privacy, shadowbox, board-on-board, and farm fence — stained both sides with a penetrating oil-based finish that resists peeling. Prep only when the wood needs it.
Fence staining details →
Decks, railings, stairs, and pergolas cleaned, restored, and sealed to handle Upstate sun, rain, and foot traffic.
Deck staining details →If your fence is in that first-stain window, the math is simple: staining before deeper UV damage sets in preserves the wood and costs less in prep. If you’ve got an older Sugar Creek-era deck, it likely needs restoration-grade prep — wash, brighten, dry — before any stain goes on. Either way we stain fences on both sides as standard, recommend a penetrating oil-based finish that won’t peel, and only do the prep your wood actually needs.

A few of the Greer areas where we stain fences and decks — and if you don’t see yours, we almost certainly still cover it:
Anywhere in Greer and the surrounding area — call 864-768-2582 or request a free written quote.
No — graying is surface-level UV damage to the top layer of wood fibers, and it’s very common on the builder pine fences across Greer’s newer subdivisions. A proper wash removes the gray layer so the stain penetrates clean wood instead of dead fibers. The sooner it’s treated, the less aggressive that prep needs to be.
In the Upstate’s sun and humidity, a quality finish typically lasts 2–5 years before a maintenance coat. Semi-transparent and solid stains last longer than clear sealers, and proper prep (washing + brightening) is the single biggest factor in how long it holds up.
Yes — staining both sides is our standard. Both sides are exposed to weather, and finishing both protects the wood and looks far better from your neighbor’s side too. If you only want one side, just let us know and we’ll price it that way.
Only when the wood needs it. Brand-new fences and decks are often clean enough to stain after a light rinse — no heavy prep required. Older, weathered, or previously-finished wood gets a proper soft wash, brightener, and dry time so the new stain bonds. We assess the surface during the estimate and only do (and charge for) the prep your wood actually needs.
We recommend oil-based stain for most fences and decks. Oil penetrates into the wood instead of forming a surface film, so it’s far less likely to peel or chip as it ages — it fades gracefully and is easy to recoat. Water-based stains are available and offer a wide color range, but film-forming finishes are more prone to peeling over time. We’ll walk through the trade-offs for your project during the estimate.
Want to pay over time? We offer Wisetack financing . Outside Greer? See all areas we serve or our cost guide.
Tell us about your Greer fence or deck and we’ll get right back to you with a clear quote. Financing available.